DINUY LADDER MINUTER MI.EL.3003
Home
There are 79 products.
Active filters
TIMING DING-DONG BISON 2000 DINUY
Earthing clamp model TGT-142, Earthing clamps are made of brass with galvanized steel clamp. For Picas of Ø 14.2 mm.
Heat-shrinkable wall medium wall with adhesive model TPMA Contraction 140/43
Completely prevent some LED lamps from becoming a bit lit when disconnected. One pickup is installed per zone or electrical circuit, before the first lamp. EFFECTIVENESS 100%.
With short press, progressively turn on or off. Adjusts by holding down. Last power on memory. Minimum ignition by holding down with light off. Easy installation by owning six terminals, avoiding common ones. Up to 8A load,
UNIVERSAL LED Switch Regulator (PATENT)
100% COMPATIBLE WITH ANY ADJUSTABLE LED. Turning on produces a 6-second luminous ascent. To adjust, change the switch state to the desired level. Changing the switch state again causes progressive shutdown. Minimum level adjustment.
Amperimetric clamp kyoritsuKT200
- A module width
- Manual switch: permanent or automatic ignition
- Without power reserve
- Simple programming with unmissable easels
- Easy reading of the programming made
- Simple installation
Terminal 6 mm pre-insulated pluggable total isolated female model afh/a
Terminal section 2.5mm pre-insulated pluggable total isolated female model afh/a
Terminal section 1.5mm pre-insulated pluggable total isolated female model afh/a
Borna capacity 50mm / 240mm single bimetalica turret model T RF
Borna capacity 25 mm / 150 mm single bimetalica turret model T RF
Borna capacity 6 mm / 95 mm single bimetalica turret model T RF
Terminal section 6 mm pre-insulated plug-in male model afmTERMINAL PRE-ISLANDING ENCHUFABLE MALE MODEL AFMSection: 6 MM
1.5 mm pre-insulated plug-in male model afm terminal