Sodeca 40 helical wall hcd
Home
There are 76 products.
Earthing clamp model TGT-142, Earthing clamps are made of brass with galvanized steel clamp. For Picas of Ø 14.2 mm.
Sodeca fan 20 helical mural hcd
Heat-shrinkable wall medium wall with adhesive model TPMA Contraction 140/43
Completely prevent some LED lamps from becoming a bit lit when disconnected. One pickup is installed per zone or electrical circuit, before the first lamp. EFFECTIVENESS 100%.
With short press, progressively turn on or off. Adjusts by holding down. Last power on memory. Minimum ignition by holding down with light off. Easy installation by owning six terminals, avoiding common ones. Up to 8A load,
UNIVERSAL LED Switch Regulator (PATENT)
100% COMPATIBLE WITH ANY ADJUSTABLE LED. Turning on produces a 6-second luminous ascent. To adjust, change the switch state to the desired level. Changing the switch state again causes progressive shutdown. Minimum level adjustment.
Sodeca 30 helical wall hcd
Sodeca 35 helical wall hcd
Terminal 6 mm pre-insulated pluggable total isolated female model afh/a
Terminal section 2.5mm pre-insulated pluggable total isolated female model afh/a
Terminal section 1.5mm pre-insulated pluggable total isolated female model afh/a
Borna capacity 50mm / 240mm single bimetalica turret model T RF
Borna capacity 25 mm / 150 mm single bimetalica turret model T RF
Borna capacity 6 mm / 95 mm single bimetalica turret model T RF
Terminal section 6 mm pre-insulated plug-in male model afmTERMINAL PRE-ISLANDING ENCHUFABLE MALE MODEL AFMSection: 6 MM
1.5 mm pre-insulated plug-in male model afm terminal