Onulec | Distribution and sale of electrical equipment online
Contact by phone
+34 959 240 094
Contact by email
onulec@onulec.com
Find by , name of product, reference, manufacturer...
There are 53 products.
Active filters
APOLO strap screw with M6 thread on the head and double thread strap to fix with nylon or wood heel. Milled groove and stamped washer to make a stop on the thread. Available in steel with zinc-plated and bi-matted coating.
APOLO double screw special for nylon plug. Head diameter designed to fix staples. Deep imprint combined PZ plus groove. Reinforcement under the head with a double cone for greater fixation strength
APOLO double screw special for nylon plug. Head diameter designed to fix staples. Deep imprint combined PZ plus groove. Reinforcement under the head with a double cone for greater fixation strength
The GU10 LED Bulb is the most used focus for excellence !! For this type of base you do not need a transformer since it works directly at 230V, you just have to replace your old bulbs with LEDs. The 5W Radiant LED Bulb mod.GUC5 equivalent to 60W conventional. 380 lumens. Base GU10 and 50,000 hours of useful life. It offers a warm 3000K light and 3 Year warranty. Made of aluminum, it integrates an optical lens, with measurements: 55x50mm. You will save up to 80% on electricity consumption.
Asparagus swingarm in galvanized steel. Includes wide washer and nut. Light fixation for false ceilings
The GU10 LED Bulb is the most used focus for excellence !! For this type of base you do not need a transformer because it works directly at 230V, you just have to replace your old LED bulbs p>
The Radiant LED Bulb 7W mod.GUC5 equivalent to 75W conventional. 540 lumens Base GU10 and 50,000 hours of useful life. It offers a warm 3000K light and 3 Year warranty. Made of aluminum, it integrates an optical lens, with measurements: 55x50mm. You will save up to 80% on electricity consumption.
Galvanized steel hook swing. Includes wide washer and nut. Light fixation for false ceilings
The GU10 LED Bulb is the most used focus for excellence !! For this type of base you do not need a transformer because it works directly at 230V, you just have to replace your old LED bulbs p>
The Radiant LED Bulb 5W mod.GUC5 equivalent to 60W conventional. 380 lumens. Base GU10 and 50,000 hours of useful life. Offers a 6500K cold light and 3 Year warranty. Made of aluminum, it integrates an optical lens, with measurements: 55x50mm. You will save up to 80% on electricity consumption.
Open APOLO multiclip nylon clamp with side joint for serial mounting. It can be fixed to profile E2000PB, E2000PG and 1000PVC, in addition to, with NP4x25 shock plug, with FX plug 6 and screw 4,5x35/45. 4.5 mm through hole
Open APOLO multiclip nylon clamp with side joint for serial mounting. It can be fixed to profile E2000PB, E2000PG and 1000PVC, in addition to, with NP4x25 shock plug, with FX plug 6 and screw 4,5x35/45. 4.5 mm through hole
LED panels are a revolution in lighting. Suspended or recessed in typical Amstrong ceilings, they achieve a completely modern aesthetic offering more lumens per watt than conventional LED tubes, creating relaxing and modern atmospheres.
The Radiant Panel LED Square mod.PR18W 18W equivalent to 45W conventional. 1200 lumens. G13 connector and 50,000 hours of useful life. Offers a 6500K cold light and 3 Year warranty. High quality LED with 160º opening and measures: 225x225mm You will save up to 60% on electricity consumption. Includes 12v external source
The Radiant LED Bulb E14 is synonymous with savings. The small sister of the E27 with a smaller diameter than her older sister, usually used in ceiling lamps or bedside tables. With few watts you get a powerful and uniform performance.
The Radiant LED Bulb 4W mod.RVC4 equivalent to 32W conventional. 300 lumens Base E14 and 50,000 hours of useful life. It offers a warm 3000K light and 3 Year warranty. Indicated for indoor lighting with measures: 108x37mm You will achieve a saving of up to 80% in electricity consumption.
The Radiant LED Bulb E14 is synonymous with savings. The small sister of the E27 with a smaller diameter than her older sister, usually used in ceiling lamps or bedside tables. With few watts you get a powerful and uniform performance.
The Radiant LED Bulb 6W mod.RVC6 equivalent to 48W conventional. 450 lumens. Base E14 and 50,000 hours of useful life. It offers a warm 3000K light and 3 Year warranty. Indicated for indoor lighting with measures: 108x37mm You will achieve a saving of up to 80% in electricity consumption.
APOLO reinforced clamp M8+M10, nut with cross welding. Hexagonal screw with imprint ph+slot and PVC washer to prevent falling screws during clamp opening. Made of zinc-plated steel.
The Radiant LED Bulb E14 is synonymous with savings. The small sister of the E27 with a smaller diameter than her older sister, usually used in ceiling lamps or bedside tables. With few watts you get a powerful and uniform performance.
The Radiant LED Bulb 4W mod.RVF4 equivalent to 32W conventional. 300 lumens Base E14 and 50,000 hours of useful life. Offers a 6500K cold light and 3 Year warranty. Indicated for indoor lighting with measures: 108x37mm You will achieve a saving of up to 80% in electricity consumption.
Open APOLO multiclip nylon clamp with side joint for serial mounting. It can be fixed to profile E2000PB, E2000PG and 1000PVC, in addition to, with NP4x25 shock plug, with FX plug 6 and screw 4,5x35/45. 4.5 mm through hole
Open APOLO multiclip nylon clamp with side joint for serial mounting. It can be fixed to profile E2000PB, E2000PG and 1000PVC, in addition to, with NP4x25 shock plug, with FX plug 6 and screw 4,5x35/45. 4.5 mm through hole
The Light of the Exterior of your house !! Radiant LED spotlights are the perfect replacement for the lighting of facades, signs, public buildings and any place where powerful lighting is necessary. We have different powers achieving significant savings in electricity consumption.
Radiant spotlight adjustable 50W power, cold light 6500K Replaces 250W halogen, 3250 Lumens and estimated useful life of 50,000 hours. 120º Opening and Motion Sensor !! . Its aluminum body provides an efficient heat dissipation greatly increasing its useful life. Recommended for facades in general, signage, posters, etc.
Open APOLO multiclip nylon clamp with side joint for serial mounting. It can be fixed to profile E2000PB, E2000PG and 1000PVC, in addition to, with NP4x25 shock plug, with FX plug 6 and screw 4,5x35/45. 4.5 mm through hole
The Apollo MEA FX nylon heel achieves the highest grip on a variety of materials due to its quadruple expansion. It does not rotate when screwing due to its anti-rotation fins. The FX heel is fluted on all four sides to ensure greater grip, and with a collar to prevent it from sneaking through the hole. Manufactured in high quality and long lasting polyamide. It can be used with different types of screws, wood thread, slingshots, sheet metal screws, etc. Supports temperatures between -40oC to +80oC. Available in different packaging boxes, plastic canishes and blisters.
The Apollo MEA FX nylon heel achieves the highest grip on a variety of materials due to its quadruple expansion. It does not rotate when screwing due to its anti-rotation fins. The FX heel is fluted on all four sides to ensure greater grip, and with a collar to prevent it from sneaking through the hole. Manufactured in high quality and long lasting polyamide. It can be used with different types of screws, wood thread, slingshots, sheet metal screws, etc. Supports temperatures between -40oC to +80oC. Available in different packaging boxes, plastic canishes and blisters.
The Apollo MEA FX nylon heel achieves the highest grip on a variety of materials due to its quadruple expansion. It does not rotate when screwing due to its anti-rotation fins. The FX heel is fluted on all four sides to ensure greater grip, and with a collar to prevent it from sneaking through the hole. Manufactured in high quality and long lasting polyamide. It can be used with different types of screws, wood thread, slingshots, sheet metal screws, etc. Supports temperatures between -40oC to +80oC. Available in different packaging boxes, plastic canishes and blisters.
The Apollo MEA FX nylon heel achieves the highest grip on a variety of materials due to its quadruple expansion. It does not rotate when screwing due to its anti-rotation fins. The FX heel is fluted on all four sides to ensure greater grip, and with a collar to prevent it from sneaking through the hole. Manufactured in high quality and long lasting polyamide. It can be used with different types of screws, wood thread, slingshots, sheet metal screws, etc. Supports temperatures between -40oC to +80oC. Available in different packaging boxes, plastic canishes and blisters.
Español
