
Siemens Delta Style series pushbutton in white only inner body
Completely prevent some LED lamps from becoming a bit lit when disconnected. One pickup is installed per zone or electrical circuit, before the first lamp. EFFECTIVENESS 100%.
Double pole insulator that COMPLETELY AVOIDS that some LED lamps (fluor, low power consumption, etc.) are a little on when turned off from the switch.
Control: By switch.
Operation: When the switch is activated, the load is switched. Disconnecting the switch disconnects the load from the two network poles, leaving it completely isolated from the network. This TOTALLY AVOIDs any possibility of residual ignition.
Installation and use recommendations: Installs by interspersing it before the first bulb. One pill per room, area or electrical circuit. In communities it will be necessary to install one A10 per floor (if all lamps are on the same circuit).
Compatible exclusively with pilotless and non-pilot switches and multi-load timers that require no minimum load.
Supply voltage | 230V/AC |
Consumption | 0.2W |
Frequency | 50Hz |
Housing | ABS VO (fireproof) white |
Warranty | 30 months (from date engraved on product) |
Dimensions | 47 x 47 x 14mm |
Weight | 37g |
Power Max. | 0W to 2000W (R). All kinds of loads. MULTILOADS |
Internal work ta | No heat: Incorporates 16A relays |
Degree of protection | IP30 |
Packing | Cardboard box with hanger |
Certifications | CE, RoHS |
According to rules: | UNE-EN 55015/A1/A2; UNE-EN 61547/A1; UNE-EN 60669-1/A1/Err; UNE-EN 60669-2-1 |