MTTE 8-36 multi-tub clamp

Open APOLO multiclip nylon clamp with side joint for serial mounting. It can be fixed to profile E2000PB, E2000PG and 1000PVC, in addition to, with NP4x25 shock plug, with FX plug 6 and screw 4,5x35/45. 4.5 mm through hole

Strap made APOLO in galvanized sweet steel. Fire approved if used with AGII gas washer.

Abrazadera APOLO reforzada M8+M10, con soldadura en cruz y tornillo hexagonal impronta ph+ranura con arandela imperdible

The Apollo MEA FX nylon heel achieves the highest grip on a variety of materials due to its quadruple expansion. It does not rotate when screwing due to its anti-rotation fins. The FX heel is fluted on all four sides to ensure greater grip, and with a collar to prevent it from sneaking through the hole. Manufactured in high quality and long lasting polyamide. It can be used with different types of screws, wood thread, slingshots, sheet metal screws, etc. Supports temperatures between -40oC to +80oC. Available in different packaging boxes, plastic canishes and blisters.

APOLO steel metal clip reinforced with two nerves to the base..../p>

APOLO screw with head sleeve to lower rod and thread wood to fix nylon tack. Ideal for hollow fixing, in vault and block.

APOLO plastic clip, for cables and hoses. High tenacity steel nail. Reusable plastic box

M6 metal APOLO clamp with two screws. Side nail specially designed for easy pre-installation, allows to open and close the clamp without the need to completely unscrew the side screw. Available in belted and bicro-matted. It comes in a box and in a self-service plastic bag.

The Apollo MEA FX nylon heel achieves the highest grip on a variety of materials due to its quadruple expansion. It does not rotate when screwing due to its anti-rotation fins. The FX heel is fluted on all four sides to ensure greater grip, and with a collar to prevent it from sneaking through the hole. Manufactured in high quality and long lasting polyamide. It can be used with different types of screws, wood thread, slingshots, sheet metal screws, etc. Supports temperatures between -40oC to +80oC. Available in different packaging boxes, plastic canishes and blisters.

The metal anchor with Apollo MEA DT expander jacket and hex screw is suitable for through bindings in medium loads. CE approved anchorage for non-cracked concrete. Cone with anti-spin fins for quick and safe expansion and shirt with anti-rotation bumps to prevent rotation in the hole. In addition, the shirt has been made of progressive chamflan to facilitate the expansion of the cone.

APOLO reinforced M8+M10 clamp, with cross welding and hexagonal screw imprint ph+ slot with unmissable washer

APOLO washer accessory for fixing with gas nailer. Installs in 10 seconds. Exclusive clipdesign design (patented) allows a firm clamping in the mouth of the nailer. Fixing with most nailers: BEA, SPIT, HILTI(GX100), W'rth, Berner, Spit, Powers.

The Apollo MEA FX nylon heel achieves the highest grip on a variety of materials due to its quadruple expansion. It does not rotate when screwing due to its anti-rotation fins. The FX heel is fluted on all four sides to ensure greater grip, and with a collar to prevent it from sneaking through the hole. Manufactured in high quality and long lasting polyamide. It can be used with different types of screws, wood thread, slingshots, sheet metal screws, etc. Supports temperatures between -40oC to +80oC. Available in different packaging boxes, plastic canishes and blisters.

APOLO double screw special for nylon plug. Head diameter designed to fix staples. Deep imprint combined PZ plus groove. Reinforcement under the head with a double cone for greater fixation strength

The spatial dispensing valve of the AGII nailer ensures the correct dosing at room temperature. APOLO gas cylinder for AGII gas nailer with safety cap. Capacity for more than 1,200 rounds. It can be used between temperatures of -10o and +30o.