Onulec | Distribución y venta de material eléctrico online
Contacta telefónicamente
+34 959 240 094
Envíanos un email
onulec@onulec.com
Buscar por EAN , nombre del producto, referencia, fabricante...
APOLO steel metal clip reinforced with two nerves to the base..../p>
Double nerve that reaches the base, offering greater resistance to start-up
High corrosion resistance zinc-plated steel
Direct fixation with bump plug or DA metal heel
Through hole of 6.5 mm/p>
Supports recommended loads up to 12 Kg safety factor included.
cable
PVC tube
Multilayer tube
Steel tube
Plastic tube
Beam
Concrete
Concrete block
Solid brick
| Denom. | Reference | Diameter (mm) | Length (mm) | Tube diameter to be fixed (mm) | Height (mm) | Clamp Thickness (mm) | Units x |
|---|---|---|---|---|---|---|---|
| F 8 | 98F | 8 | 23.8 | 8 | 9.4 | 0.8 | 100 |
| F 22 | 922F | 22 | 40.7 | 22 | 23.9 | 1.2 | 100 |
| F 8 | 96F | 6 | 21.8 | 6 | 7.4 | 0.8 | 100 |
| F 63 | 963F | 63 | 84.5 | 63 | 65.3 | 1.5 | 25 |
| F 50 | 950F | 50 | 71.5 | 50 | 52.3 | 1.5 | 50 |
| F 40 | 940F | 40 | 61.5 | 40 | 42.3 | 1.5 | 50 |
| F 32 | 932F | 32 | 53.5 | 32 | 34.3 | 1.5 | 100 |
| F 28 | 928F | 28 | 46.7 | 28 | 29.9 | 1.2 | 100 |
| F 26 | 926F | 26 | 44.7 | 26 | 27.9 | 1.2 | 100 |
| F 25 | 925F | 25 | 437 | 25 | 26.9 | 1.2 | 100 |
| F 20 | 920F | 20 | 38.7 | 20 | 21.9 | 1.2 | 100 |
| F 18 | 918F | 18 | 35.5 | 18 | 19.6 | 1 | 100 |
| F 16 | 916F | 16 | 33.5 | 16 | 17.6 | 1 | 100 |
| F 14 | 914F | 14 | 31.5 | 14 | 15.6 | 1 | 100 |
| F 12 | 912F | 12 | 27.8 | 12 | 13.4 | 0.8 | 100 |
| F 10 | 910F | 10 | 26 | 10 | 11.4 | 0.8 | 100 |
Data sheet
Specific References
APOLO threaded rod according to DIN 975 steel class 4.8 zinc-length one meter in length.
Zinc-plated APOLO steel nails reinforced with stretch marks to improve grip on very hard materials. Each 1000-nail steel case includes a gas cartridge for more than 1,200 rounds. Gas load compatible with other nailers in the same category.
Open APOLO multiclip nylon clamp with side joint for serial mounting. It can be fixed to profile E2000PB, E2000PG and 1000PVC, in addition to, with NP4x25 shock plug, with FX plug 6 and screw 4,5x35/45. 4.5 mm through hole
Abrazadera APOLO reforzada M8+M10, con soldadura en cruz y tornillo hexagonal impronta ph+ranura con arandela imperdible
APOLO threaded rod according to DIN 975 steel class 4.8 zinc-length one meter in length.
The Apollo MEA FX nylon heel achieves the highest grip on a variety of materials due to its quadruple expansion. It does not rotate when screwing due to its anti-rotation fins. The FX heel is fluted on all four sides to ensure greater grip, and with a collar to prevent it from sneaking through the hole. Manufactured in high quality and long lasting polyamide. It can be used with different types of screws, wood thread, slingshots, sheet metal screws, etc. Supports temperatures between -40oC to +80oC. Available in different packaging boxes, plastic canishes and blisters.
M6 metal APOLO clamp with two screws. Side nail specially designed for easy pre-installation, allows to open and close the clamp without the need to completely unscrew the side screw. Available in belted and bicro-matted. It comes in a box and in a self-service plastic bag.
Apolo MEA GKD nylon stud is fixed directly by not needing pre-drill. It is easy and quick to install on plasterboard for light loads. Manufactured with 30% fiberglass quickly drill the plasterboard. Used with wood screws in diameter from 3.0 to 4.5 mm. The screw can be longer than the plug as the screw can drill and pierces the plug.
M6 metal APOLO clamp with two screws. Side nail specially designed for easy pre-installation, allows to open and close the clamp without the need to completely unscrew the side screw. Available in belted and bicro-matted. It comes in a box and in a self-service plastic bag.
APOLO double screw special for nylon plug. Head diameter designed to fix staples. Deep imprint combined PZ plus groove. Reinforcement under the head with a double cone for greater fixation strength
The Apollo MEA FX nylon heel achieves the highest grip on a variety of materials due to its quadruple expansion. It does not rotate when screwing due to its anti-rotation fins. The FX heel is fluted on all four sides to ensure greater grip, and with a collar to prevent it from sneaking through the hole. Manufactured in high quality and long lasting polyamide. It can be used with different types of screws, wood thread, slingshots, sheet metal screws, etc. Supports temperatures between -40oC to +80oC. Available in different packaging boxes, plastic canishes and blisters.
Accessory APOLO metal staple is fixed to the profile and then nailed with gas nailer. It can be fixed with any gas nailer.
APOLO base accessory black flange for fixing with gas nailer. Fixation with most nailers: BEA, SPIT, HILTI(GX100), W'rth, Berner, Spit, Powers. The basebrid is clipmed to the mouth of the gun. It can be used with any type of flange and is adjustable thanks to its 4 side openings.
M6 metal APOLO clamp with two screws. Side nail specially designed for easy pre-installation, allows to open and close the clamp without the need to completely unscrew the side screw. Available in belted and bicro-matted. It comes in a box and in a self-service plastic bag.
The metal anchor with Apollo MEA DT expander jacket and hex screw is suitable for through bindings in medium loads. CE approved anchorage for non-cracked concrete. Cone with anti-spin fins for quick and safe expansion and shirt with anti-rotation bumps to prevent rotation in the hole. In addition, the shirt has been made of progressive chamflan to facilitate the expansion of the cone.
Español
