ARANDELA ALA ANCHA 6x18 ACERO CINCADO

Multiclip open APOLO clamp for gas nailer with side joint for serial mounting. Compatible ara gas washers AGII, SPIT, C3 andTrack-It, It can be fixed: to profile E2000PB, E2000PG and 1000PVC, with NP 4x25 shock plug, with fx plug 6 screw 4,5x35/45. Alignment marking

APOLO plastic clip, for cables and hoses. High tenacity steel nail. Reusable plastic box

APOLO plastic clip, for cables and hoses. High tenacity steel nail. Reusable plastic box

APOLO screw with head sleeve to lower rod and thread wood to fix nylon tack. Ideal for hollow fixing, in vault and block.

Apolo MEA GKD nylon stud is fixed directly by not needing pre-drill. It is easy and quick to install on plasterboard for light loads. Manufactured with 30% fiberglass quickly drill the plasterboard. Used with wood screws in diameter from 3.0 to 4.5 mm. The screw can be longer than the plug as the screw can drill and pierces the plug.

Accessory APOLO metal staple is fixed to the profile and then nailed with gas nailer. It can be fixed with any gas nailer.

APOLO reinforced clamp M8+M10, nut with cross welding. Hexagonal screw with imprint ph+slot and PVC washer to prevent falling screws during clamp opening. Made of zinc-plated steel.

M6 metal APOLO clamp with two screws. Side nail specially designed for easy pre-installation, allows to open and close the clamp without the need to completely unscrew the side screw. Available in belted and bicro-matted. It comes in a box and in a self-service plastic bag.

The metal anchor with Apollo MEA DT expander jacket and hex screw is suitable for through bindings in medium loads. CE approved anchorage for non-cracked concrete. Cone with anti-spin fins for quick and safe expansion and shirt with anti-rotation bumps to prevent rotation in the hole. In addition, the shirt has been made of progressive chamflan to facilitate the expansion of the cone.

APOLO accessory with threaded nut for fixing with gas nailer. Installs in 10 seconds. Easy to fix on roof when clipping the plastic part in the nailer's mouth. Fixation with most nailers: BEA, SPIT, HILTI(GX100), W'rth, Berner, Spit, Powers. Ideal for lowering rod allowing a light and easy regulation in height,

Abrazadera APOLO reforzada M8+M10, con soldadura en cruz y tornillo hexagonal impronta ph+ranura con arandela imperdible

Abrazadera APOLO reforzada M8+M10, con soldadura en cruz y tornillo hexagonal impronta ph+ranura con arandela imperdible

M6 metal APOLO clamp with two screws. Side nail specially designed for easy pre-installation, allows to open and close the clamp without the need to completely unscrew the side screw. Available in belted and bicro-matted. It comes in a box and in a self-service plastic bag.

Open APOLO multiclip nylon clamp with side joint for serial mounting. It can be fixed to profile E2000PB, E2000PG and 1000PVC, in addition to, with NP4x25 shock plug, with FX plug 6 and screw 4,5x35/45. 4.5 mm through hole

Zinc-plated APOLO steel nails reinforced with stretch marks to improve grip on very hard materials. Each 1000-nail steel case includes a gas cartridge for more than 1,200 rounds. Gas load compatible with other nailers in the same category.

APOLO steel metal clip reinforced with two nerves to the base..../p>