Metal staple for gas nailer GRAPA GRAPATRAK FT-20

APOLO base accessory black flange for fixing with gas nailer. Fixation with most nailers: BEA, SPIT, HILTI(GX100), W'rth, Berner, Spit, Powers. The basebrid is clipmed to the mouth of the gun. It can be used with any type of flange and is adjustable thanks to its 4 side openings.

M6 metal APOLO clamp with two screws. Side nail specially designed for easy pre-installation, allows to open and close the clamp without the need to completely unscrew the side screw. Available in belted and bicro-matted. It comes in a box and in a self-service plastic bag.

Multiclip open APOLO clamp for gas nailer with side joint for serial mounting. Compatible ara gas washers AGII, SPIT, C3 andTrack-It, It can be fixed: to profile E2000PB, E2000PG and 1000PVC, with NP 4x25 shock plug, with fx plug 6 screw 4,5x35/45. Alignment marking

Multiclip open APOLO clamp for gas nailer with side joint for serial mounting. Compatible ara gas washers AGII, SPIT, C3 andTrack-It, It can be fixed: to profile E2000PB, E2000PG and 1000PVC, with NP 4x25 shock plug, with fx plug 6 screw 4,5x35/45. Alignment marking

APOLO accessory with threaded nut for fixing with gas nailer. Installs in 10 seconds. Easy to fix on roof when clipping the plastic part in the nailer's mouth. Fixation with most nailers: BEA, SPIT, HILTI(GX100), W'rth, Berner, Spit, Powers. Ideal for lowering rod allowing a light and easy regulation in height,

The metal anchor with Apollo MEA DT expander jacket and hex screw is suitable for through bindings in medium loads. CE approved anchorage for non-cracked concrete. Cone with anti-spin fins for quick and safe expansion and shirt with anti-rotation bumps to prevent rotation in the hole. In addition, the shirt has been made of progressive chamflan to facilitate the expansion of the cone.

APOLO steel metal clip reinforced with two nerves to the base..../p>

Abrazadera APOLO reforzada M8+M10, con soldadura en cruz y tornillo hexagonal impronta ph+ranura con arandela imperdible

The Apollo MEA FX nylon heel achieves the highest grip on a variety of materials due to its quadruple expansion. It does not rotate when screwing due to its anti-rotation fins. The FX heel is fluted on all four sides to ensure greater grip, and with a collar to prevent it from sneaking through the hole. Manufactured in high quality and long lasting polyamide. It can be used with different types of screws, wood thread, slingshots, sheet metal screws, etc. Supports temperatures between -40oC to +80oC. Available in different packaging boxes, plastic canishes and blisters.

Open APOLO multiclip nylon clamp with side joint for serial mounting. It can be fixed to profile E2000PB, E2000PG and 1000PVC, in addition to, with NP4x25 shock plug, with FX plug 6 and screw 4,5x35/45. 4.5 mm through hole

APOLO plastic clip, for cables and hoses. High tenacity steel nail. Reusable plastic box

APOLO screw with head sleeve to lower rod and thread wood to fix nylon tack. Ideal for hollow fixing, in vault and block.

Zinc-plated APOLO steel nails reinforced with stretch marks to improve grip on very hard materials. Each 1000-nail steel case includes a gas cartridge for more than 1,200 rounds. Gas load compatible with other nailers in the same category.

Asparagus swingarm in galvanized steel. Includes wide washer and nut. Light fixation for false ceilings

Galvanized steel hook swing. Includes wide washer and nut. Light fixation for false ceilings