Onulec | Distribución y venta de material eléctrico online
Contacta telefónicamente
+34 959 240 094
Envíanos un email
onulec@onulec.com
Buscar por EAN , nombre del producto, referencia, fabricante...
Abrazadera APOLO reforzada M8+M10, con soldadura en cruz y tornillo hexagonal impronta ph+ranura con arandela imperdible
Abrazadera reforzada M8+M10
Soldadura en cruz
Tornillo M6x20 hexagonal impronta ph+ranura
Arandela para evitar que el tornillo caiga
Resistencia 150 Kg hasta Ø100
Resistencia 200 Kg hasta Ø215
La bolsa contiene 2 abrazaderas, 2 espárragos roscados M8xM80, y tacos de nylon FX ø10
Tubos multicapa
Tubos de acero Tubos de PVC Tubos de cobre
Varilla roscada
Tirafondo
Espárrago roscado
Espárrago perfil
Tornillo anclaje directo
| Denom. | Referencia | Diámetro (mm) | Longitud (mm) | Diámetro tubo a fijar (mm) | Altura (mm) | Grosor de la abrazadera (mm) |
|---|---|---|---|---|---|---|
| R 90 | 90REDRN | 90 | 127,5 | 90 | 112,5 | 1,8 |
| R 75 | 75REDRN | 75 | 115,5 | 75 | 100,5 | 1,8 |
| R 60 | 60REDRN | 60 | 93,5 | 60 | 78,5 | 1,8 |
| R 50 | 50REDRN | 50 | 86,5 | 50 | 71,5 | 1,8 |
| R 40 | 40REDRN | 40 | 78,5 | 40 | 63,5 | 1,8 |
| R 35 | 35REDRN | 35 | 72,5 | 35 | 57,5 | 1,8 |
| R 28 | 28REDRN | 28 | 65,5 | 28 | 50,5 | 1,8 |
| R 22 | 22REDRN | 22 | 60,5 | 22 | 45,5 | 1,8 |
| R 160 | 160REDRN | 160 | 202,5 | 160 | 187,5 | 2,3 |
| R 140 | 140REDRN | 140 | 178,5 | 140 | 163,5 | 2,3 |
| R 125 | 125REDRN | 125 | 166,5 | 125 | 151,5 | 2,3 |
| R 110 | 110REDRN | 110 | 148,5 | 110 | 133,5 | 1,8 |
| R 18 | 18REDRN | 18 | 54,5 | 18 | 39,5 | 1,8 |
Data sheet
Specific References
M6 metal APOLO clamp with two screws. Side nail specially designed for easy pre-installation, allows to open and close the clamp without the need to completely unscrew the side screw. Available in belted and bicro-matted. It comes in a box and in a self-service plastic bag.
Multiclip open APOLO clamp for gas nailer with side joint for serial mounting. Compatible ara gas washers AGII, SPIT, C3 andTrack-It, It can be fixed: to profile E2000PB, E2000PG and 1000PVC, with NP 4x25 shock plug, with fx plug 6 screw 4,5x35/45. Alignment marking
APOLO screw with head sleeve to lower rod and thread wood to fix nylon tack. Ideal for hollow fixing, in vault and block.
APOLO reinforced clamp M8+M10, nut with cross welding. Hexagonal screw with imprint ph+slot and PVC washer to prevent falling screws during clamp opening. Made of zinc-plated steel.
The Apollo MEA FX nylon heel achieves the highest grip on a variety of materials due to its quadruple expansion. It does not rotate when screwing due to its anti-rotation fins. The FX heel is fluted on all four sides to ensure greater grip, and with a collar to prevent it from sneaking through the hole. Manufactured in high quality and long lasting polyamide. It can be used with different types of screws, wood thread, slingshots, sheet metal screws, etc. Supports temperatures between -40oC to +80oC. Available in different packaging boxes, plastic canishes and blisters.
The Apollo MEA FX nylon heel achieves the highest grip on a variety of materials due to its quadruple expansion. It does not rotate when screwing due to its anti-rotation fins. The FX heel is fluted on all four sides to ensure greater grip, and with a collar to prevent it from sneaking through the hole. Manufactured in high quality and long lasting polyamide. It can be used with different types of screws, wood thread, slingshots, sheet metal screws, etc. Supports temperatures between -40oC to +80oC. Available in different packaging boxes, plastic canishes and blisters.
APOLO reinforced clamp M8+M10, nut with cross welding. Hexagonal screw with imprint ph+slot and PVC washer to prevent falling screws during clamp opening. Made of zinc-plated steel.
APOLO steel metal clip reinforced with two nerves to the base..../p>
The metal anchor with Apollo MEA DT expander jacket and hex screw is suitable for through bindings in medium loads. CE approved anchorage for non-cracked concrete. Cone with anti-spin fins for quick and safe expansion and shirt with anti-rotation bumps to prevent rotation in the hole. In addition, the shirt has been made of progressive chamflan to facilitate the expansion of the cone.
The Apollo MEA FX nylon heel achieves the highest grip on a variety of materials due to its quadruple expansion. It does not rotate when screwing due to its anti-rotation fins. The FX heel is fluted on all four sides to ensure greater grip, and with a collar to prevent it from sneaking through the hole. Manufactured in high quality and long lasting polyamide. It can be used with different types of screws, wood thread, slingshots, sheet metal screws, etc. Supports temperatures between -40oC to +80oC. Available in different packaging boxes, plastic canishes and blisters.
Multiclip open APOLO clamp for gas nailer with side joint for serial mounting. Compatible ara gas washers AGII, SPIT, C3 andTrack-It, It can be fixed: to profile E2000PB, E2000PG and 1000PVC, with NP 4x25 shock plug, with fx plug 6 screw 4,5x35/45. Alignment marking
The Apollo MEA FX nylon heel achieves the highest grip on a variety of materials due to its quadruple expansion. It does not rotate when screwing due to its anti-rotation fins. The FX heel is fluted on all four sides to ensure greater grip, and with a collar to prevent it from sneaking through the hole. Manufactured in high quality and long lasting polyamide. It can be used with different types of screws, wood thread, slingshots, sheet metal screws, etc. Supports temperatures between -40oC to +80oC. Available in different packaging boxes, plastic canishes and blisters.
Apolo MEA GKD nylon stud is fixed directly by not needing pre-drill. It is easy and quick to install on plasterboard for light loads. Manufactured with 30% fiberglass quickly drill the plasterboard. Used with wood screws in diameter from 3.0 to 4.5 mm. The screw can be longer than the plug as the screw can drill and pierces the plug.
APOLO steel metal clip reinforced with two nerves to the base..../p>
The spatial dispensing valve of the AGII nailer ensures the correct dosing at room temperature. APOLO gas cylinder for AGII gas nailer with safety cap. Capacity for more than 1,200 rounds. It can be used between temperatures of -10o and +30o.
APOLO strap screw with M6 thread on the head and double thread strap to fix with nylon or wood heel. Milled groove and stamped washer to make a stop on the thread. Available in steel with zinc-plated and bi-matted coating.
Español
